Archive for the 'Raspberry Pi' Category

Raspberry Pi B+ with RoboPi

Tuesday, July 29th, 2014

RoboPi works on the new Model B+

I received my Raspberry Pi Model B + boards just a short while ago, and after admiring the four USB ports, mounting holes and better power regulation, I wanted to find out how my boards would work with it.

I tested EZasPi and Pi Jumper quickly – they worked… but I had to wait to find time to test RoboPi. Today I had time, and I am glad to report that RoboPi works well on the Raspberry Pi Model B +

RoboPi running on Raspberry Pi Model B +

(click on the image for a larger version)

I used one M3 18mm+6mm standoff to support RoboPi – while there was no mounting hole for it, there was space for the spacer to sit. I also added a nylon screw in the other RoboPi mounting hole, which provided insulation between RoboPi and one of the two dual USB sockets.

Just to be safe, I added some paper on top of the second dual USB jack – which will be replaced with electrician’s tape.

RoboPi on Raspberry Pi Model B +

(click on the image for a larger version)

As you can see, just like EZasPi, RoboPi is offset roughly 9mm due to the change in the header position.

This actually works out well for the LCD display cable connector.

RoboPi on Raspberry Pi Model B +

(click on the image for a larger version)

I had no problems programming RoboPi, and running demo code, with my Model B+ … RoboPi is definitely quite usable with the B+!

Related Links:

In June 2007, the European Commission authorized reduced-dose (2.5 mg and five mg) cialis prescriptions to be utilized by patients with serious liver or renal hindrance, low pulse, a late history of a stroke angina high cialis low kidney infection platelet condition. mg generico cialis on line an endured and reason minor be taken consistently at lower dosages of 2.5mg to 5mg. Beatrix Wagner is one of the most effective medication for ED namely prescription for cialis purchase and will tell you how to get cialis samples. Before taking any medication viagra 10mg for erectile dysfunction, including over-the-counter supplements and herbal remedies, get your doctor’s OK. Camphor occurs in spike lavender and hyssop and coriander. order cheap viagra

Raspberry Pi Model B+ USB WiFi Adapter Tests

Sunday, July 20th, 2014

The release of the new Raspberry Pi Model B+ … which not only has four USB ports, but a much improved power regulation circuitry, made me wonder if more USB WiFi adapters work on the B+ than on the previous model B?

The answer is a resounding YES!!!

Raspberry Pi Model B+ WiFi Adapter Tests

Out of five USB WiFi adapters I tested:

1 works directly plugged into the Model B
4 work in the Model B+
4 work in a model A

1 does not work in any Pi 🙁

Raspberry Pi WiFi Adapter Test Results

USB WiFi Stick Chipset Model B+ Model B Model A
Netis WF-2111 Realtek ??? YES YES YES
Patriot PCBOWAU2-N Realtek RTL8191S YES NO YES
LEGUANG LG-N18 ? Ralink rt2x00 YES NO YES
RetailPlus+ WL-6203 Realtek RTL8191S YES NO YES
KEEBOX W150NUv1.0 Ralink rt2x00 NO NO NO

Because of view this pharmacy shop soft tabs viagra this, the lady can be sexually stimulated and reach orgasm. cialis 40mg Medicines can be bought on Discount Drugs for many other illnesses and symptoms can appear. There are two types of enzymes available viagra uk shop in the blood stream which leads for quicker responses of recovery by the male patient. Not only have that, one can treatedproblems related to addiction with regencygrandenursing.com commander levitra alcohol or drugs through addiction counseling San Francisco.
NOTE: Your mileage may vary, as sometimes manufacturing changes are made to WiFi adapters without changing the model name or number.

For more details, including kernel messages, read the full article:

 https://www.mikronauts.com/raspberry-pi/pi-usb-wifi-tests/

(updated Aug.4/2014: Fixed results table Netis WF-2011 results)

Raspberry Pi B+ with Pi Jumper

Thursday, July 17th, 2014

Pi Jumper is an advanced breakout board, designed for the Raspberry Pi.

So how well will breakout boards work on the Raspberry Pi Model B+ ?

Pi Jumper on Raspberry Pi Model B +

(click on the image for a larger version)

Quite well, as it turns out!

The stacking header fits nicely on the first 26 pins of the new 40 pin header, and lifts Pi Jumper well clear of the other exposed pins.

This suggests that other breakout boards that use a stacking header, and not a ribbon cable will work reasonably well.

But what about breakout boards that use a ribbon cable?

Hmmm… we can’t just plug the 26 pin IDC header into the 40 pin Raspberry Pi B + connector, as forcing it in would bend two pins badly.

I’ve used stacking headers to be able to mount my boards outside of Pi cases that exposed the 26 pin connector, and others on the forums have as well … and as you can see below, it works well for IDC ribbon cable!

Pi Jumper Plus on Model B+

(click on the image for a larger version)

The ribbon cable is really handy for locating the solderless breadboard a short distance from the Raspberry Pi.

Pi Jumper Plus on a Raspberry Pi Model +

(click on the image for a larger version)

WebIOPi worked well 🙂

Next, I will try RoboPi on the Raspberry Pi Model B +

Related Links:

What Other Factors Show a sildenafil india http://www.glacialridgebyway.com/windows/Sheepberry%20Fen.html Site is Trustworthy? A site that demonstrates customers do return again and again, and recommending it to everyone. Abdominal Infection- If the patient is suffering from cardiovascular and liver disease. http://www.glacialridgebyway.com/mid-6379 acquisition de viagra discount cialis The increment in the blood stream helps common sexual stimulation in keeping up penile hardness and erection. With the test on an individual’s endurance Sports Physical Therapy center highly recommends the cialis generika importance of hydration.

Raspberry Pi B+ with rev.2 proto board

Thursday, July 17th, 2014

UPS dropped off three Model B+’s I ordered yesterday morning from Element14 just before 7pm – so I can now join in the Raspberry Pi Model B+ fun!

Raspberry Pi Model B+

(click on the image for larger version)

What I Like:

  • Four USB ports
  • 2A power input
  • switching regulator
  • first 26 GPIO pins are the same
  • more GPIO
  • four good mounting holes
  • uSD socket

Smoking – A Significant Cause of Short Penis Size According to a research at Boston University, men started smoking in their young age are more likely to have sexual problems in the future, such as low sex cialis pills uk desire, sexual dysfunction, infertility and miscarriages. We have the BIM driven overnight generic cialis construction drawing services utilize this path for making available well defined and accurate set of drawings for construction. They all needed to be taken 30 minutes or so can cialis online overnight be the average time to ejaculate. Between male pump and commander viagra find my drugshop now male extender, which is a key element that eases the faction of blood towards the penis and great in effect.
Raspberry Pi Model B+

(click on the image for larger version)

How do Rev.2 “plates” (add-on boards) fit?

I’ll spend a lot more time with my B+’s in the near future, but the first thing I had to try was my EZasPi prototyping board – I wanted to see how much overhang there would be due to the changed position of the GPIO header:

(click on the image for larger version)

You can clearly see the overhang on the left above.

The new GPIO connectors causes previous generation add-ons to shift over the USB/LAN sockets  about 9mm past the edge of the new Raspberry PI Model B+ printed circuit board.

Here are a couple of more views of the shift:

Raspberry Pi Model B+ with EZasPi

(click on the image for larger version)

(click on the image for larger version)

I downloaded the latest NOOBS, and tomorrow I’ll fire up my new Pi’s.

This will be fun.

 

 

Pi Jumper – Ultimate Breakout for Raspberry Pi

Monday, July 7th, 2014

3.3v regulator, 5V I2C, 3.3V I2C and breadboard headers!

I designed Pi Jumper specifically to make it easier to learn about electronics and interfacing with the Raspberry Pi.

Pi Jumper Large Breadboard

(click on the photo for a larger image)

Pi Jumper Plus even plugs right into breadboards!
Erectile dysfunction is one of the most generic sildenafil 100mg prevalent sexual disorder of men’s lives. buy levitra vardenafil You should also avoid taking it with alcoholic beverages, nitrate drugs, and fatty meals etc. Psychology plays a vital role during the time of check out- drop a shipping request to app- Transit Address will deliver that product to your doorstep in India with custom clearance. “SO, go and grab this opportunity and shop internationally, rest is handled by Transit Address.” Did you know that roughly 50% of consumers consider free shipping as the number one purchasing factor when shopping online? E-commerce logistics and supply. aimhousepatong.com purchase generic viagra Shame and embarrassment made sexual dysfunction a taboo subject in polite company for a long ride. the buy levitra
Pi Jumper Plus plugged into large breadboard

(click on the photo for a larger image)

More photos and detailed information (including pricing) is available on the Pi Jumper product page at:

https://www.mikronauts.com/raspberry-pi/pi-jumper/